Wix POS Register: Using the Stripe Reader M2 Card Reader

Important:

The Stripe Reader M2 is currently available for purchase only for merchants based in the US.

Your card reader allows you to accept payment from customers by credit card, debit card, and phone app.

This reader supports all magstripe and EMV payment functions and you can use it to accept new forms of payment, such as Apple Pay, Android Pay, Samsung Pay, VISA Paywave, MasterCard PayPass, AMEX ExpressPay and Discover D-PAS.

Charging the reader

Make sure the device is fully charged before you use it.

Note:

When charging, always plug the reader into a wall outlet, not directly into the tablet.

Connecting the reader to the tablet

To set up the card reader, you need to connect it to your tablet. If you ever replace your reader, you can use the instructions below to disconnect the old one and connect a new one.

To connect or disconnect the reader:

1. Tap and release the power button on the card reader to turn it on.

   Tip: The Bluetooth turns on automatically.

How do I know if I'm using the New Wix POS or Wix POS Register?

This article will help you understand the differences between the New Wix POS and Wix POS Register.

New Wix POS

1. Open the POS tablet.

2. Tap the Connect icon

   

   .

3. Select what you want to do:

   • Connect your card reader:

     1. Tap Connect next to Card reader.

     2. Tap Connect New.

     3. Tap the relevant reader.

     4. Tap It's Powered On.

     5. Tap It's Connected.

     6. (Optional) Enter a name for the card reader and tap Continue.

     7. Enter the code shown on your card reader and tap Pair Reader.

     8. Tap Done.

   • Disconnect your card reader:

     1. Tap Unpair at the top right.

     2. Tap Unpair to confirm.

POS Register

1. Open the POS tablet.

2. Tap the Connect Reader icon

   

   at the bottom right of the tablet.

1. Select what you want to do:

   • Connect your card reader:

     1. Tap Set up Card Reader.

     2. Tap Connect next to the relevant reader.

     3. Tap Done.

   • Disconnect your card reader:

     1. Tap Unpair at the top right.

     2. Tap Unpair to confirm.

Using the card reader

Keep your card reader charged, so it's ready for use whenever you want to process a sale. The reader automatically disconnects if the battery dips below a 25% charge.

To ensure smooth functioning, make sure the card reader is no more than 49 feet (15 meters) away from the tablet.

Tip:

When the reader isn't in use, it turns off automatically after 10 hours.

Understanding the card reader lights

The Stripe Reader has 4 LED lights. When charging the card reader, the lights indicate the charging status. 4 lights indicates that the reader is fully charged.

When not charging, the left-most light is on to indicate that the card reader is ready to accept payment.

Updating the card reader software

Check for updates to the card reader software from time to time and update the software when available.

To update the card reader software:

New Wix POS

1. Open the POS tablet.

2. Tap the Connect icon

   

   .

3. Tap Card reader.

4. Tap Check for Updates.

5. If an update is available, tap Update Now and follow the instructions.

   Note: After the update has been completed, it will flash blue and orange. If the reader is unresponsive, restart it.

POS Register

1. Open the POS tablet.

2. Tap the Connect Reader icon

   

   at the bottom right.

1. Tap Check for Update.

2. If an update is available, tap Update Now and follow the instructions.

   Note: After the update has been completed, it will flash blue and orange. If the reader is unresponsive, restart it.

Troubleshooting your card reader

If you have any problems operating the card reader, check out these troubleshooting steps.